Harness Open
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The purpose is to check harness for open circuits.
- Key off.
- DLC disconnected from any scan tools.
- Disconnect the component and PCM from vehicle harness.
- Disconnect the appropriate PCM harness.
- Using an ohmmeter, isolate the circuit in question from the harness pin to the component connector pin.
- Reading should be less than 5 ohms.