Change Input And Verify Output Response
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The purpose is to verify how the PCM and actuator circuit responds to sensor input.
- Select, view and record the appropriate sensor PID(s).
- Create condition to cause input condition to change.
- Observe change (response) in actuator PID or actuator signal circuit measured by a measuring device.