Accessing PID Data Monitor (New Generation Star Tester)

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

To access PID Data Monitor, turn ignition switch to OFF position. Ensure test equipment is properly attached. Using NGS tester, perform the following steps:

Select VEHICLE & ENGINE SELECTION menu.
Select NEW VEHICLE, YEAR & MODEL.
Follow operating instructions from scan tool menu.
Select GENERIC OBD-II FUNCTIONS.
Select PID DATA MONITOR and choose only diesel-related PIDs.