Accessing Freeze Frame PID Data (New Generation Star Tester)

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

To access freeze frame data mode, turn ignition off. Ensure test equipment is properly attached. Using NGS tester, perform the following steps:

Select VEHICLE & ENGINE SELECTION menu.
Select NEW VEHICLE, YEAR & MODEL, with appropriate qualifier if needed. Such as transmission, Federal, California, etc.
Follow operating instructions from scan tool menu.
Select GENERIC OBD-II FUNCTIONS. Press CONT button if all OBD-II monitors are incomplete.
Turn ignition on.
Select FREEZE FRAME PID REQUEST.