Valve Lifter: Installation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- If assembling valve lifter, coat all components with engine oil and reassemble. To install, reverse removal procedure. Ensure valve lifter and valve lifter bore in cylinder block are coated with engine oil before installing. Valve lifter must be installed in original location.
- Install cylinder head using proper procedure. See CYLINDER HEAD table under ENGINE SPECIFICATIONS.