Removal & Installation: Turbocharger: Installation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse the removal procedure. The exhaust inlet marmon clamp must be positioned on the exhaust inlet pipe before installing the turbocharger. See Figure. Install NEW "O" rings. See Figure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .