LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine - 7.3L V8 Turbo Diesel) >> Removal & Installation >> Thermostat >> Installation

Removal & Installation: Thermostat: Installation

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a NEW "O" ring seal to position the water thermostat in the upper intake manifold.
  2. Install the thermostat housing. See Figure. Install the thermostat housing bolts. Tighten thermostat housing bolts to specification. See TORQUE SPECIFICATIONS .
  3. Connect the upper radiator hose to the thermostat housing. Fill and bleed the cooling system. See COOLING SYSTEM BLEEDING .
scientia non olet · About LEMON Manuals