LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine - 7.3L V8 Turbo Diesel) >> Removal & Installation >> Oil Pan >> Removal

Oil Pan: Removal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Manufacturer recommends removing engine for servicing oil pan. Remove engine. See ENGINE  under REMOVAL & INSTALLATION. Remove oil pan bolts. It may be necessary to cut silicone sealant on each side of oil pan. Pry upward on one side of oil pan to break seal on silicone sealant. Remove oil pan.
  2. If necessary to remove oil pump pick-up tube, remove oil pump pick-up tube-to-front cover bolts. Remove oil pump pick-up tube support bracket nut at top of main bearing cap. Remove oil pump pick-up tube and gasket.
scientia non olet · About LEMON Manuals