LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine - 7.3L V8 Turbo Diesel) >> Removal & Installation >> High-Pressure Oil Pump Drive Gear >> Removal

High-Pressure Oil Pump Drive Gear: Removal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. On all vehicles, remove the high-pressure oil pump reservoir. See HIGH-PRESSURE OIL PUMP RESERVOIR .
  2. Remove the high-pressure oil pump. See HIGH-PRESSURE OIL PUMP .
  3. Remove the drive gear from the crankcase front cover. Remove all gasket residue from the mating surfaces.