LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine - 7.3L V8 Turbo Diesel) >> Removal & Installation >> Cooling System Bleeding >> Filling

Cooling System Bleeding: Filling

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Add the correct engine coolant mixture to the degas bottle.
  2. Move the temperature blend selector to the full warm position.
  3. Run the engine until it reaches operating temperature.
  4. Add the proper engine coolant mixture to the degas bottle until the coolant level is between the "COOLANT FILL LEVEL" marks.
  5. Turn off the engine and allow the cooling system to cool.
  6. Repeat steps  1- 5 until the degas bottle level is okay.
scientia non olet · About LEMON Manuals