Removal & Installation: Camshaft: Inspection
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect camshaft for wear. Ensure camshaft journal diameter is within specification. See CAMSHAFT table under ENGINE SPECIFICATIONS.
- Inspect camshaft bearings for damage. Measure camshaft bearing inside diameter. Replace camshaft bearing if inside diameter is not within specification. See CAMSHAFT table under ENGINE SPECIFICATIONS. If necessary to replace camshaft bearings, see CAMSHAFT BEARINGS .
- Using micrometer, measure thickness of camshaft thrust plate if removed from camshaft. Replace camshaft thrust plate if thickness is not within specification. See CAMSHAFT table under ENGINE SPECIFICATIONS.