LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine - 7.3L V8 Turbo Diesel) >> Overhaul >> Cylinder Block Assembly >> Rod Bearings

Rod Bearings

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure connecting rod and connecting rod cap are marked with corresponding cylinder number before removing.
  2. Use Plastigage to check rod bearing clearance. Apply light coat of engine oil to connecting rod bolt threads before tightening nuts to specification. See TORQUE SPECIFICATIONS .
  3. Ensure oil clearance and side play are within specification. See CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS  and CONNECTING RODS  tables under ENGINE SPECIFICATIONS.
CAUTION: If main bearing failure exists, oil cooler must be replaced and turbocharger must be checked. For replacement of oil cooler, see OIL COOLER ASSEMBLY  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals