Cylinder Block Specifications

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Diameter

Standard

4.1096-4.1103 (104.384-104.402)

.010 Oversize

4.1142 (104.502)

.020 Oversize

4.1242 (104.756)

.030 Oversize

4.1342 (105.010)

Maximum Taper

.0005 (.013)

Maximum Out-Of-Round

.0005 (.013)

Maximum Deck Warpage

⁽¹⁾

⁽¹⁾	Warpage should not exceed .0030" (.076 mm) within a 6.0" (152 mm) area or .0060" (.152 mm) overall. Cylinder block may be resurfaced. DO NOT remove more than .010" (.25 mm) of material from cylinder block if resurfacing cylinder block.