LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine - 7.3L V8 Turbo Diesel) >> Engine Oiling >> Oil Cooler Assembly >> Reassembly

Oil Cooler Assembly: Reassembly

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply engine oil to NEW "O" rings and "O" ring mating surfaces. Install large "O" rings and then small "O" rings on oil cooler.
  2. Install oil cooler front and rear headers on oil cooler. Ensure locating clips are aligned in slots and headers are installed evenly on oil cooler.
scientia non olet · About LEMON Manuals