LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine - 7.3L V8 Turbo Diesel) >> Engine Oiling >> Low Pressure Oil Pump >> Removal & Disassembly

Removal & Disassembly

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Low pressure oil pump is located on front cover. See Figure.
  2. Remove the crankshaft vibration damper. See CRANKSHAFT FRONT SEAL  under REMOVAL & INSTALLATION.
  3. Remove bolts, low pressure oil pump body plate, "O" ring seal, outer gerotor and inner gerotor. See Fig 1.
Fig 1: Locating Low Pressure Oil Pump Components
G97C03801Courtesy of FORD MOTOR CO.