LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Clutch System - F250-F550 Super Duty) >> Removal & Installation >> Clutch Slave Cylinder >> Removal (F150)

Removal (F150)

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support vehicle. Turn off the air suspension system, if equipped. Air suspension switch is located in right side kick panel area. Remove transmission from vehicle. See TRANSMISSION  . Remove the hydraulic line from the slave cylinder. Disconnect hydraulic line from slave cylinder. Remove slave cylinder.