Pinpoint Test E
WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- With the transmission in Neutral, slowly press the clutch pedal. Does the clutch pedal pulsate while being pressed? If so, go to next step. If not, verify customer concern. If necessary, see SYMPTOM DIAGNOSIS (F150) table under SYMPTOM DIAGNOSIS.
- Remove the pressure plate. See CLUTCH ASSEMBLY under REMOVAL & INSTALLATION. Inspect the pressure plate for damage. Are there any signs of damage present on the pressure plate? If so, install a NEW pressure plate. If not, go to next step.
- Inspect the clutch disc. Is the clutch disc okay? If so, go to next step. If not, install a NEW clutch disc.
- Inspect the flywheel for damage and runout. See FLYWHEEL under REMOVAL & INSTALLATION. Is the flywheel okay? If so, verify customer concern. If necessary, see SYMPTOM DIAGNOSIS (F150) table under SYMPTOM DIAGNOSIS. If not, tighten, resurface or install a NEW flywheel as necessary. Test the system for normal operation.