Removal & Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Disassemble the instrument panel air distribution ducts. For additional information, refer to Instrument Panel Air Distribution Ducts .
Remove the screws and remove the center instrument panel duct.

Fig 1: Center Instrument Panel Duct Screws

Courtesy of FORD MOTOR CO.

Remove the screw and detach the defroster duct from the plenum chamber.

Fig 2: Defroster Duct To Plenum Chamber Screw

Courtesy of FORD MOTOR CO.

To install, reverse the removal procedure.