Pinpoint Test G: DTC B106B
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- G1 DETERMINE WHICH SENSOR HAS A LOW BATTERY
- Train all 4 tire pressure sensors. Refer to TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR TRAINING .
- Did all of the tire pressure sensors transmit correctly and did the horn sound when each tire pressure sensor transmitted to the SJB?
- Yes : CLEAR the DTCs. REPEAT the self-test. VERIFY system operation.
- No
: Before installing a new sensor(s)
: If a sensor(s) does not respond to the Tire Pressure Monitor Activation Tool, ATTEMPT to activate the same sensor (s) with the Tire Pressure Monitor Activation Tool. If the sensor(s) still does not respond, MOVE the vehicle to rotate the wheels at least one-fourth turn and ATTEMPT to activate the same sensor(s) again.
If the sensor(s) fails to train a second time, INSTALL a new tire pressure sensor(s). REFER to TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR .