LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus LX, 3.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Instrument Panel - Analog - F150 Pickup - Gasoline) >> Removal & Installation >> Generic Electronic Module/Central Timer Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove lower instrument cluster steering column cover. Remove bulkhead electrical harness connectors (C242 and C243) from central junction box (interior fuse panel).
  2. Unbolt and remove central junction box. Disconnect GEM/CTM electrical harness connectors. Remove screws and disconnect GEM/CTM from backside of central junction box. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals