|
|
- Caliper mounting bolts loose.
|
|
- Damaged or worn caliper pins or retainers.
|
|
- Missing or damaged anti-rattle clips or springs.
|
|
|
|
|
- Clicking noise - with brakes applied with ABS brakes
|
- ABS hydraulic control unit.
|
|
- Squealing noise - occurs on first (morning) brake application
|
|
- Acceptable condition. Caused by humidity and low disc brake pad temperature.
|
- Squealing noise - a continuous squeal
|
- Disc brake pads or linings worn below minimum thickness.
|
|
- Squealing noise - an intermittent squeal brought on by cold, heat, water, mud or snow
|
|
|
- Groaning noise - occurs at low speeds with brake lightly applied (creeping)
|
|
|
- Grinding noise - continuous
|
- Disc brake pads or linings worn below minimum thickness.
|
|
|
|
- Brake linings contaminated with grease or oil.
|
- INSPECT the brake pads and shoes for contamination. REPAIR or INSTALL new components as necessary.
|
- Brake vibration/shudder - occurs when brakes are applied
|
- Uneven disc or drum wear.
- Uneven disc brake pad or lining transfer.
- Suspension components.
|
|
- Brake vibration/shudder - occurs when the brake pedal is released
|
|
|