LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus LX, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Supplemental Inflatable Restraint System - F150 Pickup) >> Removal & Installation >> Steering Wheel >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Turn front wheels to straight-ahead position. Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Remove driver-side air bag module. See DRIVER-SIDE AIR BAG MODULE  .
  2. Remove and discard steering wheel retaining bolt. Mark steering wheel hub and steering shaft for installation reference. Using 2-Jaw Puller (ST1321) or equivalent, remove steering wheel. Route clockspring and horn wiring harness through steering wheel as wheel is lifted from steering shaft.
  3. To install, reverse removal procedure. Install NEW steering wheel bolt and tighten to specification. See TORQUE SPECIFICATIONS  . Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG warning light for proper system function. See SYSTEM OPERATION CHECK  .
scientia non olet · About LEMON Manuals