Removal & Installation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Ford Pickup, 2004 Ford Excursion, 2004 Ford Cab & Chassis, 2003 Ford Pickup, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support vehicle. Position jack stands under front axle housing Lower vehicle until front suspension is supporting vehicles weight. Remove nuts and bolts from upper mounting bracket, then remove track bar from upper bracket. Remove nuts and bolts from lower mounting bracket, then remove track bar. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .