Removal & Installation
WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Remove headlight switch knob. Rotate headlight switch bezel counterclockwise and remove bezel. Remove 2 screws and disconnect instrument panel finish panel electrical connectors. Remove instrument panel finish panel.
- Remove 4 mounting bolts and pull instrument cluster rearward. Disconnect electrical connectors and remove transmission range indicator. Remove instrument cluster. To install, reverse removal procedure. Tighten instrument cluster mounting bolts to specification. See TORQUE SPECIFICATIONS .