LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus LX, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 2084 (Electronic Engine Control System - F-150 & Mark LT) >> Removal And Installation >> Mass Air Flow (MAF) Sensor - 5.4L (3V) >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the mass air flow (MAF) sensor electrical connector.
  2. Remove the bolts and the MAF sensor.
    • To install, tighten to 7 Nm (62 lb-in).
  3. To install, reverse the removal procedure.