LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus LX, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine - 7.3L V8 Turbo Diesel) >> Engine Oiling >> Oil Cooler Assembly >> Disassembly & Cleaning

Disassembly & Cleaning

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using soft-faced hammer, tap on oil cooler front and rear headers to loosen "O" rings. Remove oil cooler front and rear headers from oil cooler by using twisting motion. See Fig 1.
  2. Thoroughly clean all components with solvent. Ensure oil cooler is thoroughly flushed to ensure all residue is cleaned from oil cooler. Dry components with compressed air.
Fig 1: Exploded View Of Oil Cooler Assembly
G97E03802Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals