LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 722 (Parking Brake System & Actuation -- F250-F550 Super Duty) >> Diagnosis And Testing >> Parking Brake >> Pinpoint Tests >> Pinpoint Test B: The Parking Brake Will Not Release

Pinpoint Test B: The Parking Brake Will Not Release

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. B1 CHECK THE FRONT PARKING BRAKE CABLE 
    • Release the parking brake control.
    • If the vehicle cannot be moved, raise and support it.
    • Release the parking brake cable tension. Refer to PARKING BRAKE CABLE TENSION RELEASE .
    • Disconnect the parking brake cable at the parking brake lever.
    • Does the parking brake release? 
    • Yes  : INSPECT the front parking brake cable for binding. INSPECT the parking brake control for wear or damage. INSTALL new components as necessary. TEST the system for normal operation.
    • No  : GO to B2.
  2. B2 CHECK THE PARKING BRAKE REAR CABLES 
    • Disconnect the RH parking brake rear cable and conduit and the LH parking brake rear cable and conduit from the parking brake lever at each wheel.
    • Does the parking brake release? 
    • Yes  : INSPECT the parking brake rear cable and conduits for wear or damage. INSTALL new components as necessary. TEST the system for normal operation.
    • No  : REPAIR the worn or damaged rear wheel parking brake components. TEST the system for normal operation.