Headlight Switch
Remove headlight switch. Check continuity between appropriate terminals with headlight switch in appropriate position. See HEADLIGHT SWITCH CONTINUITY table. See Fig 1. If continuity is not as specified, replace headlight switch.
HEADLIGHT SWITCH CONTINUITY
| Switch Position | Measure Between Terminals | Continuity | |||
|---|---|---|---|---|---|
| Headlight Circuit | |||||
| Off | B1 & H | No | |||
| Park | B1 & H | No | |||
| Head | B1 & H | Yes | |||
| Parking Light Circuit | |||||
| Off | B2 & R | No | |||
| Park | B2 & R | Yes | |||
| Head | B2 & R | Yes | |||
| Interior Light On | |||||
| Off | D1 & D2 | No | |||
| On | D1 & D2 | Yes | |||
| Dimmer Circuit | I & R | (1) | |||
|
|||||