Glow Plug: Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Both sides

Install the glow plug.
- Tighten to 19 Nm (14 lb-ft).
  
  Fig 1: Locating Glow Plug
  Courtesy of FORD MOTOR CO.
Clean and apply clean engine oil to the O-ring seals.

Fig 2: Locating O-Ring Seal
Courtesy of FORD MOTOR CO.
Using the special tool, install the glow plug harness.

Fig 3: Identifying Glow Plug Harness Special Tool (303-1114)
Courtesy of FORD MOTOR CO.

RH side

Install the RH fender splash shield. For additional information, refer to FRONT END BODY PANELS .