LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Excursion 7.3 F, RWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Removal, Overhaul & Installation -- ECONOLINE, Excursion & F250-F550 Super Duty - Diesel 7.3L (99F E Series & 99F F450/550) >> Fuel System >> High Pressure Oil Pump >> Installation

High Pressure Oil Pump: Installation

  1. Install high pressure oil pump with gasket. Install mounting bolts and tighten to specification. See TORQUE SPECIFICATIONS . Install drive sprocket on high pressure oil pump shaft. Before tightening drive sprocket bolt, ensure sprocket is fully seated on pump shaft.
  2. To complete installation, reverse removal procedure. Ensure hoses are correctly routed. See Figure. Refill high pressure oil pump reservoir with clean engine oil. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals