Flywheel Check
WARNING: This page is about a different car, the 2002 Ford Pickup, 2002 Ford F550 Super Duty, and 2002 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Using a suitable cleaning solution, clean the flywheel clutch surface.
- Inspect the flywheel for:
- Surface cracks.
- Heat check.
- Glazing.
- Scoring.
- Scratches or grooves.
- For minor damage, finish the flywheel surface with coarse emery cloth or with a fine grade (400 grit) sandpaper. To polish the surface, stroke parallel to the machine lines.
- Inspect the ring gear for:
- Worn, chopped or broken teeth.
CAUTION:
Do not use petroleum based cleaning solutions.
NOTE:
Always inspect the flywheel whenever the clutch is removed or installed new.