LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Excursion 6.8 S, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Wheel Hubs & Bearings - Full Floating Axle - Ford - Excursion & F250-F350 Super Duty) >> Removal And Installation >> Axle Shaft >> Removal

Axle Shaft: Removal

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The wheels and tires do not have to be removed in order to remove the axle shafts.
    Fig 1: Loosening And Removing Retaining Bolts
    G01543171Courtesy of FORD MOTOR CO.
  1. Loosen and remove the retaining bolts.
  2. Remove the axle shaft.
    Fig 2: Removing Axle Shaft
    G01543172Courtesy of FORD MOTOR CO.
  3. Inspect the axle shaft O-ring seal for cracks, nicks or wear and replace it if required.
    Fig 3: Replacing Axle Shaft O-Ring Seal
    G01543173Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals