Camber/Caster Service Adjuster - F-250 and F-350, 4x4 and F-450, F-550
CAMBER/CASTER SERVICE ADJUSTER SPECIFICATION
| Service Adjuster Type (Degrees) | Position Slot in Axle (Degrees) | LH Axle | RH Axle | ||
|---|---|---|---|---|---|
| Camber Change (Degrees) | Caster Change (Degrees) | Camber Change (Degrees) | Caster Change (Degrees) | ||
| 1/4 | 0 | +0.25 | 0 | -0.25 | 0 |
| 1/2 | 0 | +0.5 | 0 | -0.5 | 0 |
| 3/4 | 0 | +0.75 | 0 | -0.75 | 0 |
| 1 | 0 | +1.0 | 0 | -1.0 | 0 |
| 1/4 | 45 | +3/16 | +3/16 | -3/16 | +3/16 |
| 1/2 | 45 | +11/32 | +11/32 | -11/32 | +11/32 |
| 3/4 | 45 | +17/32 | +17/32 | -17/32 | +17/32 |
| 1 | 45 | +11/16 | +11/16 | -11/16 | +11/16 |
| 1/4 | 90 | 0 | +0.25 | 0 | +0.25 |
| 1/2 | 90 | 0 | +0.5 | 0 | +0.5 |
| 3/4 | 90 | 0 | +0.75 | 0 | +0.75 |
| 1 | 90 | 0 | +1.0 | 0 | +1.0 |
| 1/4 | 135 | -3/16 | +3/16 | +3/16 | +3/16 |
| 1/2 | 135 | -11/32 | +11/32 | +11/32 | +11/32 |
| 3/4 | 135 | -17/32 | +17/32 | +17/32 | +17/32 |
| 1 | 135 | -11/16 | +11/16 | +11/16 | +11/16 |
| 1/4 | 180 | -0.25 | 0 | +0.25 | 0 |
| 1/2 | 180 | -0.5 | 0 | +0.5 | 0 |
| 3/4 | 180 | -0.75 | 0 | +0.75 | 0 |
| 1 | 180 | -1.0 | 0 | +1.0 | 0 |
| 1/4 | 225 | -3/16 | -3/16 | +3/16 | -3/16 |
| 1/2 | 225 | -11/32 | -11/32 | +11/32 | -11/32 |
| 3/4 | 225 | -17/32 | -17/32 | +17/32 | -17/32 |
| 1 | 225 | -11/16 | -11/16 | +11/16 | -11/16 |
| 1/4 | 270 | 0 | -0.25 | 0 | -0.25 |
| 1/2 | 270 | 0 | -0.5 | 0 | -0.5 |
| 3/4 | 270 | 0 | -0.75 | 0 | -0.75 |
| 1 | 270 | 0 | -1.0 | 0 | -1.0 |
| 1/441 | 315 | +3/16 | -3/16 | -3/16 | -3/16 |
| 1/2 | 315 | +11/32 | -11/32 | -11/32 | -11/32 |
| 3/4 | 315 | +17/32 | -17/32 | -17/32 | -17/32 |
| 1 | 315 | +11/16 | -11/16 | -11/16 | -11/16 |