LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Excursion 5.4 L, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Removal, Overhaul & Installation -- ECONOLINE, Excursion & F250-F550 Super Duty - Diesel 7.3L (99F E Series & 99F F450/550)) >> Computerized Engine Controls >> Injector Driver Module >> Removal & Installation (Excursion & Pickup)

Removal & Installation (Excursion & Pickup)

WARNING: This page is about a different variant/trim than selected.

Raise and support vehicle. Remove driver's side front inner fender splash shield. Remove Injector Driver Module (IDM) connector retaining bolt. Unplug harness connector from IDM. Remove 2 IDM mounting bolts. Remove IDM. To install, reverse removal procedure. Tighten bracket bolts and connector bolt to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals