Axle Shaft: Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Lubricate the O-ring seal with lubricant prior to installation of axle shaft.

Install the axle shaft.

Fig 1: Installing Axle Shaft
Courtesy of FORD MOTOR CO.

NOTE: Coat the threads of the retaining bolts with stud and bearing mount.

Fig 2: Installing Retaining Bolts

Courtesy of FORD MOTOR CO.

Install the retaining bolts and tighten.