Vehicles with automatic transmission

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Align the torque converter studs with the holes in the engine flywheel, then lower the engine onto the engine mount towers.

Remove the transmission jack.

Fig 1: Bellhousing Bolts

Courtesy of FORD MOTOR CO.

Install the transmission-to-engine mounting bolts.
- Tighten to 47 Nm (35 lb-ft).

Fig 2: Torque Converter Nut

Courtesy of FORD MOTOR CO.

Install the new torque converter-to-flywheel retaining nuts.
- Tighten to 35 Nm (26 lb-ft).

Fig 3: Torque Converter Cover

Courtesy of FORD MOTOR CO.

Install the flywheel housing cover.

Fig 1: Identifying Transmission Fluid Indicator Retaining Nut

Courtesy of FORD MOTOR CO.

Install the automatic transmission fluid indicator and tube.
- Tighten to 8 Nm (71 lb-in).