Description And Operation: Engine: Notes

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to the exploded view under the assembly procedure in this article.

The 6.8L (3V) is a V-10 engine with the following features:

Single overhead camshafts
Three valves per cylinder
Sequential multi-port fuel injection (SFI)
Aluminum cylinder heads
Cast iron, 60-degree V-cylinder block
Individually chain-driven camshafts with a hydraulic timing chain tensioner on each timing chain
Distributorless ignition system
Electronic returnless fuel system