LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Escape 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Manual Transmission - ZF S6-650 & M6HD - 6-Speed -- F250-F550 Super Duty (2007)) >> In-Vehicle Servicing >> Shift Lever and Boot >> Removal

Shift Lever and Boot: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, 2007 Ford Cab & Chassis, and 2006 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Gearshift Lever Boot Screws
GF0005212Courtesy of FORD MOTOR CO.
  1. Remove the 4 screws and the shift lever boot.
    2. Fig 2: Locating Upper Gearshift Lever Bolts
    GF0005213Courtesy of FORD MOTOR CO.
  2. Remove the upper gearshift lever.
    3. Fig 3: Lower Shift Lever Boot
    GF0007177Courtesy of FORD MOTOR CO.
  3. Remove the lower shift lever boot.
    4. Fig 4: Lower Gearshift Lever & Shift Housing
    GF0007178Courtesy of FORD MOTOR CO.
  4. Remove the lower gearshift lever and the shift housing.
    5. Fig 5: Lower Gearshift Lever & Gearshift Lever Blocks
    GF0007179Courtesy of FORD MOTOR CO.
  5. Separate the lower shift lever and gearshift lever blocks from the shift housing.
    6. Fig 6: Inner Shift Lever Boot Ring
    GF0007180Courtesy of FORD MOTOR CO.
  6. Remove the inner shift lever boot ring, then the shift lever boot.
scientia non olet · About LEMON Manuals