LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Escape 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Manual Transmission - ZF S6-650 & M6HD - 6-Speed -- F250-F550 Super Duty (2007)) >> In-Vehicle Servicing >> Output Shaft Seal >> Removal >> Vehicles with four wheel drive (4WD)

Vehicles with four wheel drive (4WD)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, 2007 Ford Cab & Chassis, and 2006 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transfer case. For additional information, refer to TRANSFER CASE article.
    2. Fig 1: Removing Output Oil Seal (4X4)
    GF0007171Courtesy of FORD MOTOR CO.
  2. Using the special tools, remove and discard the output oil seal.
scientia non olet · About LEMON Manuals