LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Escape 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Manual Transmission - ZF S6-650 & M6HD - 6-Speed -- F250-F550 Super Duty (2007)) >> In-Vehicle Servicing >> Output Shaft Seal >> Removal >> All vehicles

All vehicles

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, 2007 Ford Cab & Chassis, and 2006 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Disconnect the rear driveshaft from the transmission and position it aside. For additional information, refer to DRIVESHAFT article.
scientia non olet · About LEMON Manuals