LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Escape 2.0 B, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Pressure Control Valve >> Removal & Installation

Removal & Installation

  1. Disconnect the six brake line fittings and plug the brake lines. See .Fig 1 Remove the brake pressure control valve bolts.
  2. To install, reverse the removal procedure. Bleed the brake system. See BLEEDING BRAKE SYSTEM  .
Fig 1: Identifying Brake Pressure Control Valve
G00299575Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals