Removal And Installation: Assembly: Engine: Notes
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS CHART
| 2000 LB Engine Stand 209-00153 or equivalent |
|
| 6.7 Liter Diesel Engine Adapter 209-00184 or equivalent |
|
| Bracket, Engine Removal 303-1518 |
|
| Camshaft Remover/Installer 303-1517 |
|
| Compressor, Piston Ring 303-D032 (D81L-6002-C) or equivalent |
|
| Dial Indicator Gauge with Holding Fixture 100-002 (D78P-4201-B) or equivalent |
|
| Feeler Gauge Set 303-D027 (D81L-4201-A) or equivalent |
|
| Gauge Bar 307-400 |
|
| 4, 400# Floor Crane, Fold Away 300-OTC1820E or equivalent |
|
| Installer, Front Crank Seal 303-1509 |
|
| Installer, Rear Crank Seal 303-1514 |
|
| Slide Hammer 100-001 |
|
| Strap Wrench 303-D055 (D85L-6000-A) or equivalent |
|
| Wrench 205-036 |
|
| Wrench, Fan Clutch Nut 303-214 (T83T-6312-B) |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® SAE 10W-30 Super Duty Diesel Motor Oil XO-10W30-QSD |
WSS-M2C171-E |
| Motorcraft® Orange Antifreeze/Coolant Concentrated VC-3-B (US); CVC-3-B2 (Canada) |
WSS-M97B44-D |
| Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 |
| Threadlock 262 TA-26 |
WSK-M2G351-A6 |