LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 3135 (Engine Mechanical - 6.7L Diesel -- F250-F550 Super Duty) >> In-Vehicle Repair >> Valve Tappets >> Removal

Valve Tappets: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH cylinder head or LH cylinder head. For additional information, refer to Cylinder Head .
    2. NOTE: To prevent engine damage, keep the valve tappets in the order in which they were removed. Install all valve tappets back in their original positions or engine damage may occur.
    NOTE: Always keep the valve tappets in the upright position or the hydraulic lash adjuster may fall out.
    NOTE: Some valve tappets will be removed with the valve tappet guides.
  2. Remove the valve tappet guides.
    • Remove the valve tappets from the valve tappet guides.
    3. NOTE: Always keep the valve tappets in the upright position or the hydraulic lash adjuster may fall out.
  3. Remove the remaining valve tappets from the engine.
scientia non olet · About LEMON Manuals