LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 3135 (Engine Mechanical - 6.7L Diesel -- F250-F550 Super Duty) >> General Procedures >> Bearing Inspection

Bearing Inspection

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect bearings for the following defects. Possible causes are shown.
    1. Cratering - fatigue failure.
    2. Spot glazing - incorrect seating.
    3. Scratching - dirty.
    4. Base exposed - poor lubrication.
    5. Both edges worn - journal damaged.
    6. One edge worn - journal tapered or bearing not seated.
    Fig 1: Identifying Bearings For Defects
    G07480753Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals