Disarming the Perimeter Alarm
WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The perimeter alarm can be disarmed by:
- pressing the UNLOCK button on a programmed IKT .
- using a programmed IKT to transition the ignition to the RUN position.
- entering the correct vehicle unlock code on the keyless entry keypad.
The perimeter alarm can be deactivated by pressing the PANIC button on an IKT . All of the lamps stop flashing and the horn stops sounding, but the alarm is still armed.