LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2967 (Anti-Theft - Passive Anti-Theft System (Pats) -- F250-F550 Super Duty) >> General Procedures >> Key Programming Using Diagnostic Equipment >> Spare Key Programming

Spare Key Programming

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If 8 keys are already programmed, this procedure does not allow any more Passive Anti-Theft System (PATS) keys to be programmed without erasing all stored key codes first.
  1. Insert the unprogrammed PATS  key into the ignition and turn the key from the OFF position to the RUN position.
  2. From the scan tool, enter TOOLBOX. Select BODY - SECURITY - PATS Functions and follow the Integrated Diagnostic System (IDS) on-screen instructions to ENTER SECURITY ACCESS.
  3. From the scan tool menu select "Program additional ignition key" and follow the IDS  on-screen instructions.
  4. The engine should now start with the new PATS  key.
scientia non olet · About LEMON Manuals