Material Specifications
WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® Metal Surface Prep ZC-31-A |
- | - |
| Motorcraft® Specialty Orange Engine Coolant VC-3-B (US); CVC-3-B (Canada) |
WSS-M97B44-D | 6.2L 24L (25.4 qt) 6.8L 26L (27.5 qt) |
| Motorcraft® Premium Cooling System Flush VC-1 |
ESR-M14P7-A | - |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A | - |
| Motorcraft® Silicone Gasket Remover ZC-30 |
- | - |
| Threadlock 262 TA-26 |
WSK-M2G351-A6 | - |
| Thread Sealant with PTFE TA-24 |
WSK-M2G350-A2 | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Pressure Tests | |
| Complete cooling system maximum pressure | Use individual reading listed on the pressure relief cap |
| Pressure relief cap | Use individual readings listed on the pressure relief cap |
| Radiator (out of vehicle) | 138 kPa (20 psi) |
| Fan Clutch Test Specifications - 6.8L Engines Only | |
| Minimum speed requirement | 1,500 rpm |
| Maximum speed requirement | 2,400 rpm |
| Thermostat Opening Temperatures | |
| Starts to open - 6.2L | 88°-92°C (190.4°-197.6°F) |
| Fully open - 6.2L | 104°C (219°F) |
| Starts to open - 6.8L | 86.7°-90.6°C (188-195°F) |
| Fully open - 6.8L | 100°C (212°F) |