Removal and Installation

WARNING: This page is about a different car, the 2011 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Remove the differential carrier. For additional information, refer to DIFFERENTIAL CASE .
Remove the LH differential carrier bearing. For additional information, refer to DIFFERENTIAL BEARINGS .
Remove the ELD retaining ring and washer.

Fig 1: Exploded View Of ELD Retaining Ring And Washer
Courtesy of FORD MOTOR CO.
Remove the ELD coil.

Fig 2: Exploded View Of ELD Coil
Courtesy of FORD MOTOR CO.
Remove the thrust bearing and thrust plate.

Fig 3: Exploded View Of Thrust Bearing And Thrust Plate
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.