Differential Ring And Pinion: Material
WARNING: This page is about a different car, the 2011 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Clear Silicone Rubber TA-32 | ESB-M4G92-A |
| Motorcraft® High Contrast Hypoid Gear Marking Compound XG-14 | - |
| Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant XY-75W140-QL (US); CXY-75W140-1L (Canada) | WSL-M2C192-A and GL-5 |
| Premium Long-Life Grease XG-1-C or XG-1-K (US); CXG-1-C (Canada) | ESA-M1C75-B |
DIFFERENTIAL RING AND PINION PARTS DESCRIPTION CHART
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Drive pinion nut |
| 2 | 4851 | Drive pinion flange |
| 3 | 4859 | Pinion dust deflector |
| 4 | 4851 | Drive pinion flange damper |
| 5 | 4676 | Drive pinion oil seal |
| 6 | 4670 | Pinion oil slinger |
| 7 | 4621 | Outer pinion bearing |
| 8 | 4616 | Outer pinion bearing cup |
| 9 | 4662 | Collapsible spacer |
| 10 | 4630 | Inner pinion bearing cup |
| 11 | 4630 | Inner pinion bearing |
| 12 | 4663 | Pinion bearing adjustment shim |
| 13 | 4209 | Drive pinion |
| 14 | 4204 | Differential assembly |
| 15 | 4221 | Differential carrier bearing (2 required) |
| 16 | 4222 | Differential carrier bearing cup (2 required) |
| 17 | 4067 | Differential carrier bearing shim (2 required) |
| 18 | 4216 | Differential ring gear bolt (12 required |
| 19 | - | Differential bearing cap (part of 4010) (2 required) |
| 20 | - | Differential bearing cap bolt (part of 4010) (4 required) |