LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2911 (Engine Mechanical - 6.7L Diesel -- F250-F550 Super Duty) >> In-Vehicle Repair >> Valve Tappets >> Removal

Valve Tappets: Removal

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH cylinder head or LH cylinder head. For additional information, refer to CYLINDER HEAD  in this service information.
    2. NOTE: To prevent engine damage, keep the valve tappets in the order in which they were removed. Install all valve tappets back in their original positions or engine damage may occur.
    NOTE: Always keep the valve tappets in the upright position or the hydraulic lash adjuster may fall out.
    NOTE: Some valve tappets will be removed with the valve tappet guides.
  2. Remove the valve tappet guides.
    • Remove the valve tappets from the valve tappet guides.
    3. NOTE: Always keep the valve tappets in the upright position or the hydraulic lash adjuster may fall out.
  3. Remove the remaining valve tappets from the engine.
scientia non olet · About LEMON Manuals